－
4
－
VP-422 Specifications
Rev3.2
4. Specifications
Model
VP-422
Acceleration Ranges
(RMS)
□
0 - 9.8m/s
2
□
0 - 19.6m/s
2
□
0 - 49.0m/s
2
□
0 - 98.0m/s
2
□
0 - 980.0m/s
2
(Nominal 80Hz at 22°C ±10%)
Frequency Response
10 to 5,000Hz ±3dB
Transverse Sensitivity
Less than 5%
Output Current
4-20mA DC proportional to RMS Acceleration “m/s
2
”
Supply Voltage
15 to 30VDC (for 4-20mA)
Power Consumption
1W Approx. (Using 24VDC)
Settling Time
2 seconds
Ambient Temperature
-25 to 90°C
Sealing
□
Drip-proof Direct-connect Type: IP65 (Dust-proof, Drip-proof)
□
Water-proof Connector Type: IP67 (Dust-proof, Water-proof)
□
Water Resistant Type: IP68 (Dust-proof, Water Resistant)
Submersible Depth: max 100m, 10bar
Maximum Shock
49,000m/s
2
Output Impedance
Loo
p Resistance 600Ω max at 24VDC
Case Isolation
above 100M
Ω
at 500VDC
Dimensions
□
Drip-Proof Direct-Connect Type
: φ27.5×45mm (Excluding Protrusions)
□
Water-Proof Connector Type:
φ27.5×56mm (Excluding Protrusions)
□
Water-Resistant Type:
φ27.5×69mm
(Excluding Protrusions)
Detail Reference
：
”5. Outline Dimensional Drawing”
Weight
□
Drip-Proof Direct-Connect Type: 135g (Excluding Cables)
□
Water-Proof Connector Type: 150g (Excluding Cables)
□
Water-Resistant Type: 140g (Excluding Cables)
Case Material
Stainless Steel (SUS303)
Output Cable
□
Drip-Proof Direct-Connect Type: 2 Core Shielded Cable, 5m
Standard Accessory
Sheath
：
Stainless Mesh
□
Water-Proof Connector Type: 2 Core Shielded Cable
Available Accessory
M12-4Pin Connector to the pick-up
Detail Reference: “8. Outline View of Connector Cable”
□
Water-Resistant Type: 2 Core Shielded Cable, 5m
Standard Accessory
Sheath
：
Blue Silicon Screened
Producible Length of
Output Cable
□
Drip-Proof Direct-Connect Type: 5 to 200m (5m step)
□
Water-Proof Connector Type:
5 to 100m (5m step)
□
Water-Resistant Type:
5 to 200m (5m step)
Maximum Laying
Length of Output Cable
1,000m
Mounting Studs
□
Quick Fit: Glue face
□
Quick Fit: M8 Male
□
Quick Fit: M6 Male
□
Quick Fit:
φ25.4mm Pole Piece Pot Magnet
Detail Reference: “6. Vibration Pick-up Mounting Studs”
