Connecting servers / workstations
Up to four computers can be connected to the IMT-L4 through the output jacks. Please
ensure that the used monitoring software has to be designed for IMV VICTRON's
ComConnect interface. The original cables provided with the Software kits can then be
connected to the IMT-L4.
ATTENTION ! :
Use shielded cables only. Shield must be connected to your
computer's ground!
NOTE: Since the UPS will not be turned off by the IMT-L4
until all connected computers
have been shut down,
you should ensure that none of these computers prevents this
process occurring because of improper adjustment of the software parameters.
Front display panel
1: LED (green):
IMT-L4 status
2: LED (red):
UPS Power-Fail
3: LED (red):
UPS Low Battery
1: IMT-L4 status (ON)
The green LED indicates normal operation of the IMT-L4 after correct initialization.
A bad connection between the IMT-L4 and the UPS will be detected by the IMT-L4
and displayed with the green LED flashing.
2: Display for Power-Fail (PF)
If the UPS detects a power fail, this information is sent to the IMT-L4, and the
red LED is lit.
3: Display for Low-Battery (LB)
If the battery voltage of the UPS falls below a certain limit, this information is
sent to the IMT-L4 and the IMT-L4 lights the red LED.
