IMT TH36K164, Manual

Page: 49 / 135

Chapter 6 Tirehand Repair 47
3 Remove the gear-bearing mounting bolts and remove the bearing.
4 Position the bearing so that the holes align with those in the arm. The grease fitting extension
port must be toward the pinion gear. Install and torque the mounting bolts (see Torque Table).
5 Install the grease fitting extension.
6 Position the pad over the gear-bearing, install and torque the mounting bolts (see Torque
Table).
BUSHING REMOVAL AND INSTALLATION
To replace a bushing:
1 Remove the weldment containing the bushing.
2 Position the bushing removal tool as shown and extract the bushing.
BUSHING REMOVAL ILLUSTRATION
3 To install the bushing, assemble the tool as shown and press the bushing in.
Courtesy of Crane.Market