IMT CAS440HU, Manual, Page: 31 / 34

Parts 29
A
28
29
26
25
17
14
15
9
8
9
18
17
19
20
21
23
13
OIL DRAIN FOR COMPRESSOR.
REMOVE STRAIGHT PIPE AND CAP.
REPLACE WITH NIPPLE AND ELBOW.
REUSE CAP FROM COMPRESSOR.
AIR BLEED DOWN
BACK TO TANK.
IDLE PRESSURE
FOR SPEED CONTROL.
THESE ARE PLUMBED TOGETHER
TO CREATE A FLUID BY-PASS.
1
5
3
4
16
18
30
IN THE EVENT THAT A
CRANE IS ALSO
INCLUDED THEN CAP #41
WILL BE REMOVED AND
THE RETURN FROM CRANE
WILL BE PLUMBED INTO
THE ADAPTER #40.
34
35
DETAIL A
SCALE 1 : 1
32
31
33
22
PRIOR TO TESTING THIS FINISHED SUB-ASSEMBLY,
BEND THIS LINE STRAIGHT UP.
THIS WILL ALLOW CLEARANCE TO FLOOR CROSS-MEMBER.
37
20
27
38
39
4X
2X
11 2X
4X
51720149 PARTS LIST
ITEM PART # DESCRIPTION QUANTITY
1. 52720161 BASE-WELDMENT 1
2. 73051614 MOTOR 1
3. 52070869 BRACKET-HYD MOTOR 1
4. 70056043 PULLEY 1
5. 70073051 COMPRESSOR 1
6. 60104598 TIGHTENER BAR 1
7. 52706302 TIGHTENER BOLT-8.00in 2
8. 72063005 WASHER .50 FLAT (WAS 19) 12
9. 72060094 CAP SCR .50-13X 1.75 HH GR5 Z (WAS 6) 8
10. 72062080 NUT .50-13 HEX NYLOCK (WAS 8) 10
11. 72060097 CAP SCR .50-13X 3.00 HH GR5 Z 2
12. 73540449 VALVE-RELIEF (WAS 73054995) 1
13. 73054435 GAUGE-PRESS LIQ FILLED 5000PSI 1
14. 72053049 NIPPLE-PIPE BLK .38X CLOSE 1
15. 72053283 ELBOW-STREET BLK .38 X 90 DEG 1
16. 72053555 TEE-STL .75 1
17. 72053556 ELBOW-STREET STL .75 X 90 DEG 2
18. 72053747 ADPTR-M STR/FPT 12 .75 2
19. 72053713 ELBOW-MPT/90/FPT SWL .75 .75 1
20. 72053558 ADPTR-MPT/HEX/MPT .75 .75 (WAS 3) 2
21. 72053750 ADPTR-M STR/FPT 16 .75 1
22. 72532367 ADPTR-M STR/M JIC 16 12 1
23. 72531131 ELBOW-STREET STL .25 X 90 DEG 1