70735257 SII Handheld Remote
8
Section - 3
MIN / MAX Adjustment Fundamentals
Before performing dynamic MIN and MAX adjustments, make sure that the area around the controlled machine is
safe to operate.
•
Power the Base Unit for dynamic adjustment.
•
Ensure that the Base Unit LEDs and displays are close enough to be easily read.
•
Adjust Mode time-out defaults to a ten-second window of opportunity where the unit returns to normal operating
mode if none of the switches are operated within the ten-second window. The timer resets to 10 seconds each
time a switch or the trigger is operated while in Adjustment Mode.
•
Exist Adjust Mode either by:
•
Pressing the STOP button
•
Waiting for 20 seconds without operating any of the function switches on the unit.
•
Releasing the function switch used to enter trigger adjustment.
MIN / MAX Adjustment Procedure for 70735257 & 70735258
1. Turn the controller on by twisting the red STOP button clockwise until the button releases (pops UP).
2. Move Switch S1 UP and allow it to return to center.
3.
Enter Adjust Mode by first holding switch S7 DOWN. Then, while still holding switch S7, hold switch S1 UP for
four (4) seconds. Adjust Mode is indicated when the bottom three base unit LEDs begin flashing: OUT, IN &
ERR.
LED LIGHTS
1
TX
2
RX
3
ERR
4
BATT
BASE UNIT LEDs
+V1, +V2, +V3
BASE UNIT VOLTAGE OK
1
HEALTH
2
RF TX
3
RF RX
4
CAN TX
5
CAN RX
6
OUTPUT ACTIVE
7
INPUT ACTIVE
8
ERROR
assoc
TX ON
assoc
store
70735260
+V1
+V2
+V3
HTH
RTX
RRX
CTX
CRX
OUT
IN
ERR
OUT
BU-2H20XF-11003
An Oshkosh Corportation Company
707352658
BU-2H20XF-11002
S1
S7
S6
S5 S4
S3 S2
06/15/2022
SII Telescopic Proportional Electric Crane Radio Remote
Summary of Contents for 70735257
Page 4: ...iv...
