1-12
Microstepping MForce MicroDrive Manual Revision R112706
Options and Accessories
Parameter Setup Cable and Adapters
The optional 12.0' (3.6m) parameter setup cable part number MD-CC300-000 facilitates communications
wiring and is recommended with first order. It connects from the 10-Pin IDC Connector located at P2 to a
PC's USB port. If the12-pin pluggable locking wire crimp connector is used at P1, adapter MD-ADP-1723C
is required to use the MD-CC300-000.
USB to SPI ..........................................................................................................MD-CC300-000
Prototype Development Cable
To speed prototype development, these cables connect to user interface via flying leads with MForce mating
connector on opposite end.
Mating connector to 12-pin pluggable locking wire crimp plugs into MForce or adapter MD-ADP-1723C.
Choose from 2 lengths:
12.0" (30.5cm) ..........................................................................................................ADP-3512-FL
10.0' (3.0m) .......................................................................................................... PD12-1434-FL3
Mating connector to MForce 4-pin motor interface:
10.0' (3.0m). ....................................................................................................... PD04-MF17-FL3
Figure 1.2.5: P3 — 4-Pin Locking Wire Crimp Motor Connector
P3 Connector - Motor Phase Connector
Pin Assignment - P3 Motor
4-Pin Wire Crimp
Function
Description
Pin 1
ØA
Phase A of the Motor
Pin 2
ØA
Phase A of the Motor
Pin 3
ØB
Phase B of the Motor
Pin 4
ØB
Phase B of the Motor
Table 1.2.5: P3 — Pin Assignment, Motor Phase Connections
P3
4-Pin Locking Wire Crimp
1 2 3 4
Recommended Connector Shell and Pins
Shell: AMP 1445022-4
Pins: AMP 1-794610-2
Wire: 20 AWG Shielded Twisted Pair
Summary of Contents for MFORCE MICRO DRIVE Plus MICROSTEPPING
