5 / 13 www.imrelax.com
2.3 Operation and parameter instruction
Via following operation, enter sub menu(parameter menu) shown in Picture 6
l
In main menu, chick 1/6 function button into corresponding parameter menu.
l
In sub menu(page), chick main item on the left side of displayer, can shift to corresponding sub menu(page)
quickly.
2.3.1 ADDR--> Address: Set DMX Address
Click and select the "ADDR", can enter the page of DMX address setting, range from 1 to 512, the address code
shouldn
’
t is not greater than (512- channels quantity), otherwise the light will not been controlled. Following is the
operation:
Enter the page of DMX address, as shown in Picture 7, click the blank area in right side of display will pop-up diglog
as in Fig. 4, modify value, then click
‘
ENTER
’
to confirm and save DMX address code.
Picture 7 page of DMX Address
2.3.2 MODE--> WorkMode: Set Light work mode
Enter the page of
‘
WorkMode
’
as shown in Picture 8 and modify setting. Can set light work mode, control lamp and
DMX channel mode.
Picture 8 page of work mode
◆
DMX Ctrl
: Choose to set DMX Mode,
◆
Auto Run
: Choose to set Auto Mode,
◆
Sound Ctrl
: Choose to set Sound Mode,
◆
M/S Choose:
Available just in
‘
AUTO RUN
’
or
‘
SOUND Ctrl
’
mode.
ON--> Master. (Data will be send to other slave lamp immediately.)
OFF--> Slaver.(NOT send data to other lamp via DMX Cable).(
Default
)
◆
Light Switch:
ON--> Turn on the light,
OFF--> Turn off the light.
◆
Channel Qty:
Light support 2 DMX Channel mode: sample or extend
。
Simple --> 16CH.(
Default
)
Expand--> 20CH(or null).