4 / 13 www.imrelax.com
2.2.2 Parameter value setting
When the selected item is value need to been modified, the dialog shown in Picture 4 will popup.
Picture 4 Dialog of value setting
l
Modify value
：
Can quickly modify value via pull the slider to the desired position, or click the button of
‘
up
’
or
‘
down
’
whit finger on the right side to set the exact desired value, another way is roll encoder on the right hand
side of panel.
l
Apply value
：
When Value had been modified, Then press the bottom of
‘
apply
’
in the left corner to apply to the
light, but hav
’
t saved
；
l
Save Value
：
Any time, click on the lower right corner of the "OK" button, the setting will been saved into internal
memory.
2.2.3 Boolean parameter setting
l
when the selected parameters is a Boolean value (such as ON or OFF), can directly modify setting by chick
corresponding item, the setting will been saved right now.
l
When the parameter is a key item, chick corresponding item, a dialog shown in Picture 5 will been popup ask
for the confirm. Chick
‘
sure
’
to confirm.
Picture 5 Dialog of confirm
2. 2.4 Sub Menu
（
Parameter
）
Chick item of main menu, enter corresponding sub menu, shown in Picture 6, total 6 sub menu, includes class of
parameter and status:
l
ADDRESS
：
Set light DMX address.
l
WORKMOD
：
Set light work mode, master or slave mode when in auto run mode.
l
DISPLAY
：
Set display parameter, eg. select language.
l
TEST
：
Used for test light, modify DMX channel data to test function
，
the corresponding function of reference
channel function table.
l
ADVANCE
：
Set light running parameter.
l
STATUS
：
view light current status.
Picture 6 Parameter menu