
• If the power lead is damaged it must be replaced by the manufacturer, an approved repair company or by any qualified
person, to avoid all risks.
Warnings
1. Non-foaming bath oils and mineral salts can be used; please test a small amount first and then increase the quantity
progressively if necessary.
2. Use the bath mat only for its intended use, as described in this guide.
3. If you suffer from a pathological condition such as varicose veins, certain skin disorders, etc, or if you are pregnant,
please consult your doctor before you use this device.
REMOTE CONTROL COMPONENTS
A: Power control button
B: On/Off button
C: Time control button
D. Program control button
C
D
A
B
How to change the remote control’s batteries
The remote control works with a flat type CR2032 3V battery
(provided with the device).
How it works :
• To change the battery, please use a flathead screwdriver (not provided) with good
breadth.
• Place the tip of the screwdriver in the slit located at the back of the remote control.
• Turn your screwdriver counter clockwise so that the triangle facing the symbol
representing a closed padlock is in front of the opened padlock symbol.
• Remove and change the battery, reverse steps to close the battery compartment.
MAIN UNIT COMPONENTS
E: Power control button (Low, Medium, High)
F: Time control button (10-15-20-30-60 minutes)
G: Program control button (P1-P2-P3-P4)
H: On/Off button
E
G
F
H
INSTRUCTIONS FOR USE
Mounting instructions
• The main unit is a wall type unit, which guarantees complete electrical safety.
• Note: if you have doubts regarding the correct positioning or mounting of the device, always consult a qualified
electrician.
4
Hydro Massager
EN