ImpulseRadar PinPointR User Manual V1.5
Page 15 (36)
Using ViewPoint
From the home screen of your Device, press the ViewPoint
icon to enter the application’s start screen.
The start screen, as shown below in
, provides access to the various functions of ViewPoint.
, the left-hand image shows an example of Device connection with all functions
available. This screen includes the system battery status, which can be monitored from within
ViewPoint as shown. The right-hand image shows the limited functionality available when ViewPoint
is disconnected from the PinPointR system.
Note:
Generally, the ViewPoint version number can be found on the start screen below the
ImpulseRadar logo, as shown in Figure 13. However, this may also appear to the right of the logo,
depending on the Device or its screen orientation.
Figure 13
PinPointR start screen when Device connected (L), Device not connected (R)
Switching between different GPR units
ViewPoint will detect if connecting to a GPR unit that is not the same as the previous GPR unit it was
connected to and will prompt you to restart ViewPoint.
Preferences and Settings
The preference and settings menu, as shown below in
and
, contain the parameters
needed to control the PinPointR system during data acquisition. Once set, these parameters remain
unchanged for all subsequent data acquisition. The menu for settings can be displayed in a basic
version but also a more advanced mode. ViewPoint starts in basic mode, but you can activate the
advanced settings with the slide bar.
