ImpulseRadar PinPointR User Manual V1.5
Page 17 (36)
Description of user preferences:
•
Default Project Name (Single Line)
–
By default, the
name is the serial number of the GPR unit. The operator
can edit/delete and change the name as they wish.
•
Measurement System
–
Defines whether metric or
Imperial values are used. When set to Imperial, the
units will be in feet (ft.) and 10ths of ft.
•
Vertical scale
–
Set time or depth for the vertical scale.
•
Operator Name
–
Info will be stored in the PDF report.
•
Company Name
–
Info will be stored in the PDF report.
•
Corporate Logo -
Display any *.png logo in the PDF Field
Summary.
•
Marker Table Grouping
–
Select if markers will be
sorted by its type or by id in the PDF Field summary.
•
Map View
–
When activated a background map is
viewed together with the radargram during a survey.
•
Markers
–
Select available marker standards (APWA,
AS5488, JUPEM, or Custom).
•
Auto-zoom
–
If auto-zoom is activated, the vertical
scale is adjusted to fit the data area on the screen every
time a new survey is started.
•
Language
–
Select language
–
English, Swedish, or
French.
•
Restore User Preferences
–
Set the user preferences to
factory default.
Projects
From the start screen, you may select either a ‘
Single-
Line Project’ or ‘Multi
-
Line Project.’ As the names
imply, this gives the option of collecting radar profiles in either single or multi-line profiles.
Single-line projects for individual profiles
or multi-line projects if you want to
record several profiles within the same
project. In multi-line mode, the operator
can select between Dual-View, Reference
Line, or GPS projects, as shown in
. Regardless of the project type, you
must select a project folder to which the
Figure 15
user preferences
Figure 16
Project modes
