Impulse PT300, Owner'S Manual

Page: 20 / 27

─
20
─
Console Panel Functions
BUTTONS
SPEED+, SPEED-; , INCLINE-;
SPEED ONE TOUCH 2, 4, 6, 8, 10, 12;
INCLINE ONE TOUCH 2, 4, 6, 8, 10, 12;
START; STOP; POWER; PROGRAM/ENTER;
, PROGRAM-; FAN
AUTO. ADJUST MODE
1. Auto. adjust:
Hold "\- and Speed+\-" when stop, Through Auto. Adjust mode after 3S.
2. Switching Between Miles and Kilometers
Hold "Start" key, Reset safe-key, Through switch between miles and kilometers
mode to select "SI" or "Eng" by "Speed+" or "Speed-".
Program mode: total 14 kinds
Manual mode
Target mode 3 kinds: time mode, distance mode, calories mode
Preset mode 5 kinds: P1-P5
User mode 2 kinds: U1 and U2
HRC mode 3 kinds:
HR1 (HEALTH) Target heart rate pulse 60%~70% of max. heart rate pulse
HR2 (FITNESS) Target heart rate pulse 70%~80% of max. heart rate pulse
HR3 (ADVANCED) Target heart rate pulse 80%~85% of max. heart rate pulse
Manual mode
1. Plug into a surge protector outlet. Reset the "CE Switch" (Yellow pan)
2. Stand on the treadmill and straddle belt. Attach "CE Switch" clip to your clothes.
3. Press POWER button. There will be an eight (3) second delay after pressing the
POWER button before data can be entered.
4. Press START button. Belt will begin to move after 5 seconds. Step on belt slowly
after the belt starts moving. Speed or incline can be adjusted by using the
appro (increase) or - (decrease) button.
5. To end your workout, press STOP button. Belt will gradually slow down to zero.