1)Insert the Washers (#35), the Cam (#12) and the Was-
hers (#35) onto the Pivot Axle (#37) , secure them into
place using a Retaining Snap Ring (98).
2)Insert the Sway Frame (#4) onto the Pivot Axle (#37),
secure them into place using a Retaining Snap Ring
(98).
3)Insert The End Cap (#19) onto the Pivot Axle (#37) and
secure them using:
one Hex Head Screw (#88)
M12×30
one Spring Washer (#100)
12
Φ
Step4
Assemble the Cam and
the Sway Frame
11