14
Step9
Assemble the Weight Plates
1)Insert both the Guide Rods (#20)into the Main Upright
(#1).
2)Slide the Weight Rubber Bumper (#28)down onto each
Guide Rod(#20).
3)Carefully begin sliding the Weight Plate one by one in
sequence :#29,#30,#31,#41
4)Align both the top ends of Guide Rods (#20)to the Main
Upright (#1)and secure them using:
Two Allen Bolts (#64)M10×75
Two Spring Washers (#79) 10
Two Washers(#75) 11× 20×2
Two Rubber Caps (#49)
Φ
Φ
Φ
Make sure that Washers(#75)and Spring Washers(#79) are
on the top side.
N o t e