Visit www.improvedracing.com for additional support
8
IN
OUT
ENV
-140
Figure 5 - Oil Line Routing Between EFR-100 and ENV-140
10. Lubricate the oil filter seal, pre-fill with engine oil, and install the oil filter
into the remote oil filter pedestal.
11. Trim the plastic fascia panel located on the front left side of the frame
rail as shown in Figure 6 to clear the oil lines.
Figure 6 - Trimming the Front Left Fascia Panel
12. Use the provided zip-tie to secure the oil lines to the existing hole in
the frame rail, as shown in Figure 7.
