XDB300-0-0-GB-04
December 2007
Page 6
XDB903-1-0-GB-XX
Mount the Drop Box in a suitable location on a cement slab. Take into consideration
any security issues, accessibility, routing of wires and visibility of the “Diagnostic
Indicators
”.
Figure 3: Tag Retention Box Position
1.
Position the Mounting Bracket inside the base of the Drop Box.
2.
Mark out and drill the mounting hole.
3.
Fix the Drop Box into position (using the Mounting Bracket and M10 Rawl Bolt).
4.
Remove the Face Plate Assembly (including the Throat Assembly).
5.
Connect the Drop Box as per Figure 4.
6.
Re-attach the Face Plate Assembly.
7.
Hang the Tag Retention Box in position 1 (see Figure 3) below the Throat
Assembly.
8.
Mark out and drill two suitable holes for the Power Cable and Comms Cable.
9.
Seal the Power Cable Hole and Comms Cable Hole using the supplied PG7 Cable
Glands.
