Impresind E.L.C. 2000 User And Maintenance Manual Download Page 15

 

a

ELITURBO SYSTEM 

Section 4 – Protection systems 

 

SECTION 4 –PROTECTION SYSTEMS 

4.1 Protection devices 

To comply with the dispositions of the Community Directives applicable to the unit that this guide 
is referred to, Impresind Srl has predisposed on the unit the security systems requested by the 
existing legislation. 

 

4.2 Clothing 

As the product cannot be installed at normal working height and is not reachable by the users during 
normal activities, there is not any particular clothing prescription for the personnel. 
 
The maintenance personnel are obliged to wear specific clothing and to use personal protection 
devices. 

 

4.3 Residual risks 

 

Pay attention to the movement of the ventilator. Do not introduce limbs –
Mechanical danger 

 

 

 

Use of water to clean is forbidden –Electrocution danger 

 

4.4 Emergency situations 

 

In case of emergency:  

• 

Stop immediately the engine and open the electric circuit with the

main switch 

• 

Identify and eliminate the problem controlling the original causes 

• 

Contact the Technical Assistance of Impresind Srl 

 

 
 
 
 
 
 

IT IS ABSOLUTELY FORBIDDEN TO USE WATER TO ESTINGUISH
FIRES 
ONLY USE POWDER OR CARBON DIOXIDE FIRE ESTINGUISHERS 

 

 

 

15  

IST. E101.101GB –- ed. 11/08 

Summary of Contents for E.L.C. 2000




















Reviews: