GB
10
2.2.5.3 Reading a stored program
Press the
key and the display will show the first space in memory while the
symbol
blinking.
Pressing several times the
key , will display the programmes stored.
To exit programs reading and go back to the main display , press the key or wait 30”sec.
2.2.5.4 Modifying a program
Press the
key, the display will show the first space in memory while the
symbol
blinking.
Press several times the
key and select the programme to be changed.
By pressing
keys it is possible to change the settings.
To save changes, press the
key.
To exit the programming mode press the
key or wait 30”sec.
2.2.5.5 Deleting a program
Press the
key, the display will show the first space in memory while the
symbol
blinking.
Press several times the
key and select the programme to be deleted.
To delete the selected program, press and keep pressed the
key, until the display will
show “
-
-
:
-
-
“
To delete all the programs, press and keep pressed the
key, until the display after showing
“
-
-
:
-
-
“ will show “EALL”.
To exit and go back to the current time, press the
key.
2.7.6 Setting temperature and humidity values
Default factory settings:
Temperature : 26°C
Relative humidity : 75%
Keep pressed the
key until “SP “ is displayed ( then release the key). The display shows
the set point value and the
symbol blinking.
Use the
keys to increase or decrease the value.
To confirm press the
key or wait 10”sec.
Summary of Contents for ColdAIR FPA109
Page 30: ...16 FPA109 TA159 TA209 TA209 2SD TA309...
Page 31: ...17 TC109 TC109 SD TC209...
