Impex PLATINUM MARCY PM-9150, Owner'S Manual

Page: 10 / 26

STEP 3 (See Diagram 3)
A.) Slide a Plastic Washer (#106) onto the axle on Upper Hanger Bracket (#92).
Insert the axle through the Upper Cross Brace (#83) from bottom. Secure it with
one M8 x ½” Allen Bolt (#80), one Ø 7/8” Washer (#81), and one D-shaped
Washer (#90).
B.) Slide a Plastic Washer (#106) onto the axle on Lower Hanger Bracket (#93).
Insert the axle into the Lower Cross Brace (#4) from top.
C.) Do not tighten the Bolts until instructed to do so.
D.) Attach the Hanger Panel (#33) to the Upper Hanger Bracket. Attach the Upper
Hanger (#94) to the Hanger Panel. Align the holes. Secure them together with
three M6 x 5/8” Allen Bolts (#44) and Ø ¾” Washer (#59).
E.) Repeat Procedure D to install the Lower Hanger (#96).
F.) Attach the Middle Hanger Bracket (#97) and the Middle Hanger (#95) to the
Hanger Panel from each side. Align the holes. Secure them together with two M6
x 5/8” Allen Bolts (#44) and Ø ¾” Washer (#59).
G.) Securely tighten all the Bolts.
9