background image

 

TABLE OF CONTENTS

 

 

 

   BEFORE YOU BEGIN...................................................................................…. 1 
   IMPORTANT SAFETY NOTICES..................................................................…. 2 

WARNING LABEL PLACEMENT…………………………………………………….  3 

   HARDWARE PACK……….....…....................................................................…. 4 
   ASSEMBLY INSTRUCTIONS........................................................................…. 6 
   EXPLODED DIAGRAM……………………………………………………………….   11 
   PARTS LIST...................................................................................................… 12 

CARE, MAINTENANCE, AND STORAGE…………………………………………  13 
OPERATING NOTES…………………………………………………………………  13 
COMPUTER…………………………………………………………………………… 14 
EXERCISE GUIDELINES…………………………………………………………….  15 

   WARRANTY.................................................................................................…. 17 
   ORDERING PARTS.....................................................................................….. 17 

 

 

 

 

 
 

BEFORE  YOU  BEGIN 

 

Thank you for selecting the MARCY Magnetic-Resistance Upright Bike NS-1003U by 
IMPEX

®

 INC. For your safety and benefit, read this manual carefully before using the 

bike.  As a manufacturer, we are committed to provide you complete customer 
satisfaction. If you have any questions, or find there are missing or damaged parts, we 
guarantee you complete satisfaction through direct assistance from our factory. To 
avoid unnecessary delays, 

please call our TOLL-FREE customer service number. 

Our 

Customer Service Agents will provide immediate assistance to you. 

 

 

 

Toll-Free Customer Service Number       

1-800-999-8899 

Mon. - Fri. 9 a.m. - 5 p.m.  PST 

www.impex-fitness.com 

[email protected]

 

 
 
 

©

 IMPEX INC. 

1

 

Meijer.com

Summary of Contents for NS-1003U



















Reviews: