9
STEP 5
(See Diagram 5)
A.) Attach the Leg Developer (#7) to the open bracket on the Front Post (#5). Secure it with one
Leg Developer Axle (#16), two M10 x ¾” Allen Bolts (#39), and two Ø ¾” Washers (#43).
B.) Insert three Foam Tubes (#12) halfway through the holes on the Leg Developer and Front
Post. Push six Foam Rolls (#17) onto the Tubes from both ends. Plug six Foam Roll End
Caps (#26) into the ends.
C.) Slide an Olympic Sleeve (#29) onto the weight post on Leg Developer. Attach a Spring Clip
(#18) onto the Sleeve.
D.) Attach the Arm Curl Pad (#21) to the Arm Curl Stand (#10). Secure it with two M8 x 5/8”
Allen Bolts (#41) and two Ø 5/8” Washers (#44).
E.) Insert the Arm Curl Stand into the Front Post. Use the M10 Lock Knob (#32) to lock the Arm
Curl Stand in position.
F.) Remove the Arm Curl Stand when doing Leg Developer exercises.
DIAGRAM 5
10
Summary of Contents for MD-860
Page 12: ...11 ...
