STEP 3 (See Diagram3)
A.) Place the Seat pad (#10) onto Main Frame (#1). Secure it to the two L-shaped Brackets (#11)
with two M8 x ¾” Allen Bolts (#32) and two Ø 5/8” Washers (#35). Secure the Seat to the Main
Frame with one M8 x 2 1/8” Allen Bolt (#30) and one Ø 5/8” Washer (#35).
B.) Attach the Backrest Board (#9) to the two Backrest Supports (#6). Secure it with four M8 x 1
5/8” Allen Bolts (#31) and four Ø 5/8” Washers (#35).
C.) Insert the Foam Tube (#8) halfway through the hole on the Front Vertical Frame (#4). Push
two Ø 2 ¾” Foam Rolls (#14) onto the Tubes.
D.) Insert the Long Foam Tube (#7) halfway through the upper hole on Front Vertical Frame. Push
two Ø 3 1/8” Foam Rolls (#13) onto the Long Tube. Lubricate the inside of the Foam Grips
(#15) with water. Slide the Foam Grips onto the Long Foam Tube (#7) from both sides.
DIAGRAM 3
8
Summary of Contents for MARCY SB-241
Page 11: ...9...
