Impex MARCY PRO MD-5139, Owner'S Manual

Page: 17 / 28

©IMPEX INC. www.marcypro.com
16
Lower Cable assembly instruction Step-13
A.) Attach the 59” Lower Cable (#40) to a Pulley (#57) to the bottom opening on the Rear Vertical
Beam (#6). Secure the Pulley to the Rear Vertical Beam with the Foot Plate (#16), one M10 x 3
⅜” Allen Bolt (#73), two
Ø ¾” Washers (#66), and one M10 Aircraft Nut (#86). Secure the Foot
Plate to the Cross Brace (#2) with two M10 x 1” Allen Bolts (#68), four Ø ¾” Washers (#66), and
two M10 Aircraft Nuts (#86).
B.) Draw the Cable underneath the Pulley to the open bracket on the Weight Glide Base (#8).
Attach a Pulley to the bracket. Secure it with one M10 x 1 ¾” Allen Bolt (#69), two Ø ¾” Washers
(#66), and one M10 Aircraft Nut (#86).
C.) Draw the Cable around the Pulley then upward to the Double Floating Pulley Bracket (#18).
Attach a Small Pulley (#103) to the Bracket. Secure it with one M10 x 1 ¾” Allen Bolt (#69), two Ø
¾” Washers (#66), and one M10 Aircraft Nut (#86).
D.) Draw the Cable around the Pulley then downward to the open bracket on the Pulley Support
Frame (#97). Secure the end of the Cable with one M10 x 1” Allen Bolt (#68), two Ø ¾” Washers
(#66), and one M10 Aircraft Nut (#86).
E.) Connect the Shiver Bar (#30) to a Long Chain (#64) with a C-clip (#61). Connect the Long Chain
to the Cable with another C-clip.