©
IMPEX INC.
www.impex-fitness.com
12
STEP-5
A.) Do not tighten all Bolts and Nuts until instructed to so.
B.) Place the pivot on bottom of Left Stride Tube (#52) to the open bracket on left Pedal
Support (#41L).
C.) Secure the Tube to the Pedal Support with one M10 x 3
⅛” Hex Bolt (#32), one Sleeve
(#33), one Ø
⅞” Flat Washer (#37), and one M10 Aircraft Nut (#34).
D.) Cover the Hex Bolt and Nut with a Pivot End Cap each.
E.) Attach the Left Pedal Support rear pivot to the left Crank (#17). Secure it with one left Pedal
Axle (#40L), one Wrinkled Washer (#43), one Ø 1
⅛” x
Ø ½ Flat Washer (#45), and left
Pedal Axle Nut (#44L).
F.) Repeat B, C, D, and E to install the right Pedal Support (#41R).
G.) Securely tighten all Bolts and Nuts installed in Step-4 & Step-5.
