STEP 5 (See Diagram 5)
A.) Attach the two Backrest Supports (#3) to the pivot on the Main Frame (#1). Secure it with
one M12 x 5 ¾” Allen Bolt (#31), two Ø1” Washers (#38), and one M12 Aircraft Nut (#36).
Do not over tighten the nut and bolt. Make sure the Backrest Supports are able to swivel.
B.) Attach the Backrest Incline Support (#4) in between the two Backrest Supports. Secure it
with one M12 x 5 ¾” Allen Bolt (#31), two Ø 1” Washers (#38), and one M12 Aircraft Nut
(#36). Attach the other end of the Backrest Incline Support to a selected slot on the Main
Frame to obtain the desired backrest incline position.
C.) Place the Backrest Board (#12) to the Backrest Supports. Secure it with four M8 x 1 5/8”
Allen Bolts (#34) and Ø 5/8” Washers (#40).
D.) Place the Seat (#11) onto the Main Frame. Secure it with four M8 x 1 5/8” Allen Bolts
(#34) and Ø 5/8” Washers (#40).
DIAGRAM 5
10
Summary of Contents for MARCY MCB-880M
Page 5: ...HARDWARE PACK 4 ...
Page 6: ...HARDWARE PACK 5 ...
Page 14: ...EXPLODED DIAGRAM 13 ...
Page 15: ...14 ...