Impex MARCY DIAMOND MD-8870, Owner'S Manual, Page: 9 / 34

CAGE ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen
Wrenches.
NOTE: It is strongly recommended that two or more people assemble this machine to
avoid possible injury.
STEP 1 (See Diagram 1)
A.) Do not tighten Nuts and Bolts until instructed to do so.
B.) Insert a Side Base Frame (#4) into the Rear Right Vertical Frame (#2). Secure it with two
M10 x ¾” Allen Bolts (#72) and two Ø ¾” Washers (#81).
C.) Attach a Front Vertical Frame (#1) onto the Side Base Frame. Secure it with two M10 x 3
1/8” Allen Bolts (#70), four Ø ¾” Washers (#81), and two M10 Aircraft Nut (#83).
D.) Attach the front of Side Upper Frame (#6) to Front Vertical Frame. Secure it with two M10
x ¾” Allen Bolts (#72), one Right Chin-up Bracket (#27), and two Ø ¾” Washers (#81).
E.) Attach the rear of Side Upper Frame to the Rear Right Vertical Frame. Secure it with two
M10 x ¾” Allen Bolts (#72) and two Ø ¾” Washers (#81).
DIAGRAM 1
8