STEP 4
(See Diagram 4)
A.) Attach the Backrest Board (#23) to the Backrest Supports (#19). Secure it with four M8 x 1
3/8” Allen Bolts (#59) and Ø 5/8” Washers (#65).
B.) Place the Seat Pad (#24) onto the Seat Bracket (#12). Secure it with four M8 x 1 3/8”
Allen Bolts (#59) and Ø 5/8” Washers (#65).
C.) Attach the Arm Curl Pad (#25) to the Arm Curl Bracket (#22). Secure it with two M8 x 5/8”
Allen Bolts (#60) and Ø 5/8” Washers (#65).
D.) Attach the Arm Curl Bracket to the bracket on the Arm Curl Stand (#15). Insert the M8 x 3
½” Allen Bolt (#58) through the open track on the Arm Curl Stand and the holes on the
Arm Curl Bracket. Secure the Bolt with two Ø 5/8” Washers (#65) and one M8 Aircraft Nut
(#68). Do not over tighten the Nut and Bolt. The Bolt needs to be able to slide on the track
freely.
E.) Insert the Arm Curl Stand into the storage post behind the upright beams when using the
Lat Bar or Leg Developer.
DIAGRAM 4
10
Summary of Contents for IGS-8859
Page 10: ...DIAGRAM 3 9 ...
Page 13: ...12 ...
