background image

 

Operation Tips 
 

Observing the following statements and warnings reduces the likelihood of serious or 
fatal injury. 
 
1.  Only two people are allowed to use the teeter totter at the same time with a 

combined weight of no more than 400 lbs. 

2.  On-site adult supervision for children of all ages. 
3.  Instruct children not to walk close to, in front of, behind, or between moving items. 
4.  Instruct children not to swing empty seats. 
5.  Instruct children to sit in the center of the seat with their full weight on the seat and 

hold on to the handlebar at all times. 

6.  Instruct children not to use the equipment in a manner other than intended. 
7.  Instruct children not to get off equipment while it is in motion. 
8.  Dress children appropriately with well fitted shoes and avoid ponchos, scarfs, and 

other loose-fitting clothing that is potentially hazardous while using equipment. 

9.  Instruct children not to use the equipment when the equipment is wet. 
10.Instruct children not to attach items to the equipment, such as, but not limited to, 

jump ropes, clothesline, pet leashes, cables and chain as they may cause a 
strangulation hazard. 

11. Lock the teeter-totter with the strap locks when not in use. 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

13 

Meijer.com

Summary of Contents for Gym Dandy TT-320
















Reviews: