STEP 5
(See Diagram 5)
A.) Attach the ball end of the Cable (#27) to the Pulley (#28). Place the Pulley in the open
slot on the Lat Bar Frame (#31). Secure it with one M10 x 2 1/8” Hex Bolt (#32), two
Pulley Bushings (#29), two
∅
¾” Washers (#3), and one M10 Aircraft Nut (#4).
B.) Slide the Weight Holder (#33) onto the Lat Bar Frame from the bottom. Connect the
Cable to the Holder with a Hook (#26).
D.) Connect the Lat Bar (#25) to the Cable with a Hook (#26). When using the Lat Pull
down, insert the Lat Bar Frame into the opening on the Front Stabilizer. Use the Knob
Bolt to hold the desired height of Lat Bar Frame.
9
Summary of Contents for Competitor CB 610
Page 12: ...11 ...
