ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches.
NOTE: It is strongly recommended two or more people assembling this machine to
avoid possible injury.
STEP 1 (See Diagram 1)
A.) Connect the two Upright Beams (#1) by a Cross Brace (#2) in the mid-span.
B.) Secure each end of Cross Brace to each Upright Beam with two M8 x 2 ½” Hex Bolts
(#20), one Bracket (#10), two Ø 5/8” Washers (#26), and two M8 Aircraft Nuts (#24).
C.) Insert the Backrest Adjustment Bar (#11) through the selected holes on the Upright
Beams to obtain desired incline position.
DIAGRAM 1
5
Summary of Contents for CB-204
Page 10: ...9 ...
