1. Hold the handle and lift the trainer up, so the transport wheels touch the floor.
2. Move the trainer to your designated position while lifting the trainer.
3. Carefully let down the trainer.
ADDITIONAL INFORMATIOIN
1. The trainer requires an 9V, 1.3A adaptor.
counter-clock wise, so the leveling foot touches the floor.
2.When the trainer is idle for 4 minutes, it enters power save mode, and the workout result
is stored until the next workout.
3. To reset the console, replug in the adaptor.
Make sure the trainer is placed on the flat floor, and rotate the leveling foot clockwise or
HANDLE
TRANSPORT
WHEEL
11
HOW TO MOVE THE TRAINER
HOW TO ADJUST THE BALANCE OF THE TRAINER
