Trigger
This drop-down box allows the user to specify the
behavior
conditions, of the external trigger, necessary to start
image capture. Note that all triggers work in
conjunction with
‘Limit capture time to:’
and
‘Limit
number of frames to:’
. If you do not want these
settings to affect the trigger then set them to zero.
Trigger
Start capturing images when the trigger is
while high
high ( voltage present ) and continue
capturing images until the trigger goes low
( voltage absent ).
Trigger
Start capturing images when the trigger is
while low
low ( voltage absent ) and continue
capturing images until the trigger goes high
( voltage present ).
Trigger
on
Start capturing images when the trigger goes
rising edge
from low ( voltage absent ) to high ( voltage
present ).
Trigger
on
Start capturing images when the trigger goes
falling edge
from high ( voltage present ) to low
( voltage absent ).
Limit capture
Same as in ‘Series of Frames’
.
time to
Limit number
Same as in ‘Series of Frames’
.
of frames to
Save all frames
Causes frames captured as a result of multiple
to same folder
trigger events to be saved to the same folder. If this
is not selected, then a new folder will automatically
be created with each trigger event.
Text Overlay
Same as in ‘Single Frames’.
Accept
Same as in ‘Single Frames’.
Cancel
Same as in ‘Single Frames’.
Page
33 of 44
