Cheetah Pregius Camera with GigE Vision
®
Interface – User Manual
August 27, 2019
Page
93
of
123
Rev 1.0
4.7.11.1 Controller Settings
Figure 58:
Canon lens control – Controller settings
InitLens
Initializes the Canon Lens, if one is mounted to the camera. The
InitLens command should always be applied after power up.
LensControllerStatus
Shows the status of Canon Lens initialization.
IrisRangeCheck
Enables internal checkout of Iris.
LensPresenceCheck
Check for lens presence.
LensClockPolarity
Sets the polarity of the Lens Clock.
4.7.11.2 Focus Settings
Figure 59:
Canon lens control – Focus settings
NearFull
Drives the focus to the fully Near position.
FarFull
Drives the focus to the fully Far position.
FocusStepValue
Sets the focus step size for NearStep and FarStep focus. A typical step
size has a value of 4.
FarStep
Drives the focus toward the Far direction based on amount defined in
the FocusStepValue feature.
NearStep
Drives the focus toward the Near direction based on the amount
defined in the FocusStepValue feature.
FocusStop
Stops focus movement.
FocusEncoderStatus
Shows the current focus encoder value after issuing the
GetFocusEncoderStatus command.
Reset Focus Encoder
Resets the Focus encoder.
