Ordering
1. Scan your order into the ScanTel
®
IM2001 scanner.
2. Be sure you are connected to the Internet using Dial-up networking
if necessary. If you have a dedicated Internet connection, this is
always true.
3. Make sure your ScanTel
®
IM2001 scanner communication cable is
connected to your computer.
4. Under the Options make sure to select proper scanner model:
ScanTel
®
CS15xx.
5. Start the WebPush application. The program installed by default
under Start Menu/Programs/WebPush/impush.
6. Follow the directions in the WebPush application. It will lead you
through the process of sending your order to Imperial.
7. When you receive a link to your order, click it to review the order in
your web browser.
8. After clicking the link for your order, review it on the web site. You
must be sure to maintain the order and then check it out.
9. Be SURE to “check out” your order on the web. Imperial will NOT
process your order until you “check out”!
10. Done! Your order will be packed and shipped as soon as possible
after check out.
Should you experience any problems or questions,
please contact Imperial’s Customer Service Department.
1-800-558-2808
3
6
Charging the Batteries
The IM2001 contains a rechargeable lithium ion battery. To charge the
battery, connect the USB cable to your PC computer. Connect the other
end of the USB cable into the port on the side of the scanner. The battery
will charge via the USB cable.
Low Battery Warning
The ScanTel
®
IM2001 will indicate a low power state to the user by
blinking the LED indicator red while trying to scan a barcode.
Audio Control
To toggle the beeper tone on or off, press and hold the large button for
10 seconds until the LED indicator turns solid amber (beeper tone off)
or until the LED turns solid amber and a double tone is heard (beeper
tone on).
Cleaning
Clean the ScanTel
®
IM2001 with a soft, clean cloth. Do NOT use any
solvent such as alcohol or any abrasive substances.
USB cable
ScanTel
®
IM2001 Scanner
