Imperial DABMAN i500 BT, Manual

Page: 76 / 244

76
Operating Manual
E
Now select „your“ network. If the requested network doesn‘t appear, you can repeat the
search via the menu item „Rescan“.
After selecting the network, you must now enter the network password. At least, if you
have properly encrypted your WLAN router.
Which we would strongly advise you to do at this point.
Use the navigation wheel to enter the password for your WLAN router: turn the wheel to
select the letters and numbers, and press the wheel to confirm the entry. Special charac-
ters can be found by scrolling further with the wheel.
When the password has been entered fully, go to the field [ok]. Please do not confirm
every letter with [ok], as this would cancel the input process.
After confirming via the OK button, the DABMAN i500 BT sends the password to the rou-
ter („Please wait“ appears on the screen), which - after successful synchronisation - re-
gisters the DABMAN i500 BT (indicated on the display as „Connected“). If everything has
gone well, the network setup wizard will respond with the completion message „Settings
complete“. Press the navigation wheel to return to the main menu.
The entries you have made are stored in the device and don‘t have to be entered again.
The next time you turn on the DABMAN i500 BT, it will find your router by itself and auto-
matically log into the network.
Manual settings
You must select this entry if your router doesn‘t reveal the network name and you have to
enter it manually or if the router doesn‘t have a DHCP server and the IP address should
be permanently assigned. From here onwards, the setup follows the same steps as „in-
tegration via cable“.
WPS - Wi-Fi protected setup
Behind this cryptic name is a standard for easily and securely setting up the DABMAN
i500 BT in a network. Please note that your router must also support this protocol in
order for it to work with the connection..
BDA Dabman i 500_BT_Deutsch_01_19.indd 76 18.02.19 13:13