Impecca IWA15-KS30 User Manual Download Page 4

ENGLISH

–4–

  

Plug in power plug completely.

 

Do not start or stop the unit by inserting or 

pulling out the power plug.

 Do not damage power cord or replace 

with a non-original power cord.

• Otherwise, it may cause electric shock or 

fire due to potential short circuit.

• It may cause electric shock or fire.

• It may cause electric shock or fire. 

• If the power cord is damaged, it must 

be replaced by the manufacturer or an 

authorized service center or a similarly 

qualified person to avoid hazard.

 

Do not modify power cord length.

 

Do not operate with wet hands or in a 

damp environment.

 

Do not direct airflow directly at room 

occupants.

• It may cause electric shock or fire.

• It may cause electric shock.

• This could be harmful to their health.

 

 Always ensure effective grounding/

earthing.

 

 Do not allow water into or onto the front of 

cabinet, control panel or power cord.

 

Always use dedicated power outlet and 

circuit breaker. 

• Incorrect or missing grounding may lead to 

electric shock.

• It may cause failure of unit or electric shock.

• Sharing a circuit can lead to fire.

 

 Unplug the unit if it emits strange sounds, 

smells or smoke.

 

 Do not plug unit into an electrical socket 

that is loose or damaged.

 

Do not operate the unit while the 

chassis is open or removed.

• Unit may need repair. 

• It may cause fire and electric shock.

• It may cause electric shock.

 

 Ensure the power cord is kept away from 

any heating sources.

 

 Do not disassemble or modify unit.

 

 Do not use the power cord near 

flammable gas or combustibles, such as 

gasoline, benzene, paint thinner, etc.

• It may cause fire and electric shock.

• It may cause failure and electric shock.

• It may cause an explosion or fire.

 

 Ventilate room before operating  

air conditioner if there was a gas leakage.

• It may cause explosion, fire, and burns.

WARNING

READ THESE NOTICES CAREFULLY—THEY ARE IMPORTANT!

 

 When the air filter is removed for cleaning, 

avoid touching the internal metal parts of 

the unit.

 Do not clean the air conditioner with water. 

 

Ventilate the room well when used 

together with a stove, etc.

• It may cause an personal injury and/or 

damage to the unit.

• Water may enter the unit and degrade the 

insulation. It may cause an electric shock.

• An oxygen shortage may occur when 

using a stove in a room with closed 

windows.

 

 When the unit is to be cleaned, power off  

the unit and circuit breaker.

 

Do not put a pet or house plant where it 

will be exposed to direct air flow.

 Do not use for specialized purposes.

• Do not clean unit when power is on as it 

may cause fire and electric shock and/or 

personal injury.

• This could injure or be harmful  

to your pet or plants.

• Do not use this air conditioner to 

preserve precision devices, food, pets, 

plants, and art objects.

• It may cause deterioration, etc.

CAUTION

Summary of Contents for IWA15-KS30





































Reviews: