5
CAUTION
ELECTRICAL INFORMATION
• Be sure your electrical wiring is adequate for the model you have chosen. This information can be found on
the rating label, a silver-colored sticker generally located on the upper-right side of the cabinet.
• Be sure the air conditioner is properly grounded. To minimize shock and fire hazards, proper grounding is
important. The power cord is equipped with a three-prong
grounding plug for protection against shock hazards.
• Your air conditioner must be connected to a properly
grounded wall receptacle. If the wall receptacle you intend
to use is not adequately grounded or protected by a time
delay fuse or circuit breaker, have a qualified electrician install the proper recep
-
tacle.
• Ensure the receptacle is accessible after the unit installation.
Stop operation and remove window filler
panels from window during severe storm or
hurricane.
Hold the plug by the head of the power
plug when unplugging unit.
Unplug the power cord when not using
the unit for extended periods of time.
• Operation during a severe storm may allow
a significant amount of water to enter the
indoors.
• Pulling from the wire can cause wire to fray
leading to electric shock or fire.
• Will prevent damage to the unit.
Do not place obstacles around air-intake
vents or inside cool air outlet.
Do not place heavy objects on the
power cord and ensure that the cord
is not pinched or stressed.
Always insert the filters securely.
Clean filter at least once per month.
• It may cause failure of appliance.
• There is danger of fire or electric shock.
• Operation with dirty filters (or without
filters) will effect performance and may
cause damage to the unit.
Do not use strong detergent such as
wax or paint thinner to clean the unit.
Use a damp, soft cloth.
• Appearance may deteriorate due to change
of product color or scratching of its surface.
CAUTION
NOTE:
The power supply cord with this air conditioner
contains a current detection device designed to reduce the risk
of fire. In th
e event that the power supply cord is damaged, it
cannot be repaired -- it must be replaced with a cord from the
Product Manufacturer.
The power supply cord contains a current device that senses damage to the power
cord and excess current draw from the unit. To test your current device do the
following:
1.
Plug in the Air Conditioner.
2.
Press the TEST button. You will hear a click as the RESET button pops out
within the rubber housing and the LED will turn off.
3.
Press the RESET button. You will hear a click as the button engages and the
LED will illuminate.
4.
The power supply cord is now supplying electricity to the unit.
Note: Your model may have the TEST and RESET buttons on the side or the
front of the plug head.
NOTES:
• Do not use the TEST and RESET buttons to turn the unit on or off.
• If the current device fails the test or the power cord becomes damaged, the entire power cord must be
replaced with an equivalent power cord and current device by a licensed electrician.
Side button
version
