Handling the remote controller
•
Use the remote controller within a distance of 26 feet (8 meters) from the air conditioner, pointing it towards
the receiver (located on the front of the unit, towards the top). Proper reception is confirmed with a beep.
Replacing batteries
The remote controller is powered by two AAA (LR-03) batteries housed in the rear section and protected by a cover.
1.
The remote ships with the batteries in a separate package. Insert them before attempting to use for the first
time.
2.
Remove the cover by pressing and sliding off.
3.
Insert the batteries being sure to have the (+) and (-) ends in their respective places.
NOTE: When the batteries are removed, the remote controller erases all programming. After inserting new
batteries, the controller must be reprogrammed.
Remote Controller Specifications
Model
RG51B1/EU
Rated Voltage
3.0V (1.5v AAA x 2)
Signal Receiving Range
26 feet (8 meters)
Operating (Environmental) Temperature
41°F - 140°F (-5°C - 60°C)
Performance Features
1.
Operating Modes: AUTO, COOL, DRY, FAN.
2.
Timer setting function (24 hours).
3.
Temperature Setting Range: 62°F - 88°F (17°C - 30°C).
4.
Full-function LCD (Liquid Crystal Display).
CAUTION
•
The air conditioner will not accept commands from the remote if any curtains, doors or other materials or objects
block the signals from the remote controller.
•
Be sure to prevent any liquid from falling into the controller. It should also not be subjected to direct sunlight or
heat.
•
If the remote receiver on the A/C is exposed to direct sunlight it may not properly receive commands from the
remote.
CAUTION
•
Do not mix old and new batteries or combine batteries of a different type.
•
Do not leave the batteries in the remote controller if it is not going to be used for 2 to 3 months.
•
Dispose of the old batteries in the special containers found at certain retail stores and recycling centers.
3