7
ENGLISH
FR
ANÇAIS
ESP
AÑOL
TROUBLESHOOTING
THE MILL DOES NOT RUN WHEN SWITCHED ON:
1. First, ensure that the cover has been correctly seated. If it is not been, the mill
will not operate. If you have determined that the cover has been correctly
seated, go to the next step.
2.
The electrical power may have been shut off to that wall outlet. In some cases,
this could be due to a circuit breaker or fuse being disabled, or, in other cases,
there are wall switches that control power to outlets that could have been
moved by mistake. To see if power is going to be wall outlet, you can plug
another appliance into the outlet, or, alternatively, you could plug the mill into a
different outlet that you know is functioning. If the power is going to the outlet,
go to the next step.
3. Unplug the unit, then check the cable to make sure that it is not been severed
and that is still correctly attached to the mill. If the cable is fine, go to the next
step.
4. Contact Courant Technical Support.
THE MILL IS OPERATING NORMALLY, BUT STOPS ABRUPTLY:
1.
Immediately turn off the mill. A foreign object, such as a pebble, green unroasted
coffee bean, or even a twig, may have jammed the blades.
2. Unplug the mill from the outlet.
3. Remove the cover, and try to dislodge any found objects. If you are successful,
plug the mill back into the outlet, and resume writing your coffee.
THE GRIND IS NOT FINE ENOUGH OR COARSE ENOUGH:
1. Adjust the amount of time for the grinding process.
THE MILL IS ABNORMALLY LOUD OR MAKES STRANGE SOUNDS WHEN
GRINDING:
1.
In normal operation, the process of running a motor and grinding coffee is
inherently loud. However, if the mill is louder than normal or makes strange
sounds, stop grinding, remove the mill from the wall outlet, remove the cover,
and check to see if foreign objects are being ground.
