PPI-4-116 REV. C
IMPCO Technologies Inc.
July, 2015
Page 8 of 15
3030 South Susan St.
Santa Ana, CA 92704
www.impcotechnologies.com
3030 S Susan Street, Santa Ana, CA 92704
Ph: +1 714 656 1200
Fax: +1 714 656 1400
17. Place the holder in the up position and slide the
Holder and the Seal (9) into the Body (7) of the VFF30.
Looking through the fuel port, position the Seal above
the cavity of the seal recess.
18. Coat the Pin Insertion Tool with petroleum jelly and
push the Seal (9) through the Holder and into the Seal
recess of the VFF30 Body (7). Look through the fuel
port to ensure the Seal is seated in the seal recess and
that the groove in the seal is visible.
19. Use needle nose pliers to hold the Seal Retainer
Washer (14).