July, 2015
IMPCO Technologies Inc.
PPI-4-116 REV.C
3030 South Susan St.
Page 13 of 15
Santa Ana, CA 92704
www.impcotechnologies.com
3030 S Susan Street, Santa Ana, CA 92704
Ph: +1 714 656 1200
Fax: +1 714 656 1400
33. Tighten Screws (17), alternating from side to side
on opposite sides of the cover until all screws are
solidly set. Torque to 60-70 in-lbs. (6.8-7.9 Nm).
34. Lift Lever (6) to ensure it moves properly and verify
that the Valve Pin (10) follows lever travel.
35. Turn Diaphragm (3) so the gasket side is down
(see illustration on page 2) place on the Body (7) and
rotate to position so the screw hole pattern aligns with
the holes in the Body (there is only one position in
which the holes will line up).