background image

3

SAFETY INFORMATION

Specific Safety Instructions

Electrical generator must always be grounded,
(connected to earth).

Petrol or diesel powered generators must never
be used in an unventilated closed spaces. The
exhaust fumes are highly dangerous and can
cause “Carbon Monoxide Poisoning” which will
cause drowsiness and death.

The generator must be mounted on a firm level
surface.

The electrical output load must not exceed the
maximum load stated on the rating plate.

Exceeding the rated load will damage the unit
or shorten its life and will invalidate the
guarantee.

The engine must not be run at speeds that
exceed the maximum stated on the rating plate.

Operating an engine at excessive speeds
increases the hazard of personal injury.

Do not tamper with components, which may
increase or decrease the governed speed.

Mains extension leads, mains supply leads, and
all electrical equipment must be in good working
condition.

Never operate electrical equipment with
damaged or defective mains supply leads.

Keep the area around the generator clear of
obstructions at all times. Never locate the
generator against a building or near a canvas or
plastic structure i.e. Tents etc.

Always use the correct fuel mix as stated in the
user manual and on the rating plate.

To prevent fire, always stop the engine when
refueling and never over fill the fuel tank.

Always clean up spilt fuel immediately using
sand.

Do not use the generator in or near an explosive
atmosphere.

To prevent an electric shock, never operate the
machine in rain, snow or touch with wet hands.

Check the fuel system periodically for leaks,
seals and hoses should be checked for signs of
deterioration or chafing. Check for loose or
missing clamps, damaged fuel tank or filler cap.
All defects should be corrected before further
use.

Always allow the generator to reach full
operating speed before connecting any
electrical load.

Always disconnect the electrical load before
switching the generator off.

To prevent surging that may possibly damage
electrical equipment, do not allow engine to run
out of fuel while electrical loads are connected.

Before transporting the generator in a vehicle,
drain all fuel to prevent leakage.

To prevent an electric shock and fire, never
connect an electrical load with the electrical
output switched on.

Do not connect the generator to any other
electrical source.

The engine speed has been factory set to
provide safe operation. Tampering with the
engine speed adjustment could result in
overheating of attachments and could cause a
fire. Never attempt to “speed-up” the engine to
obtain more performance. Both the output
voltage and frequency will be thrown out of
standard by this practice, endangering
attachments and the user.

Store the generator in a well-ventilated area with
the fuel tank empty.

Fuel Filling instructions
Warning!

Select bare ground for fuelling and

move at least 10 feet (3m) from fuelling spot
before starting the engine. After refuelling,
properly tighten fuel cap; wipe off any spilled
fuel and check for leakage.

Warning!

If fuel gets spilled on clothes,

especially trousers, it is very important to
change clothes immediately. Do not rely on
evaporation.

Flammable quantities of fuel may remain on
clothes after a spill for longer than expected.

Summary of Contents for IM1500I





















Reviews: