impact SL190, User Manual

Page: 9 / 13

A4 VERTICAL ROD
A5
ROD POINTER
A6 SAMPLE BRASS CUPS
A1 SLIDER
It allows the penetration made by a needle or a cone, inside the specimen.
A2
BUTTON
By keeping the button pushed, the slider is free to move granting an easy positioning of the same. This
allows its free fall.
A3
DIAL
It allows to read the penetration value with a 1/10 of mm. resolution
A4 VERTICAL ROD
It allows the moving of the machine body, thanks to the special screw.
A5 ROD POINTER
Its vertical moving gives a rotation to the dial pointer. Once the penetration is made, by carefully and gently
pushing the rod downwards in order to have its extremity touching the upper part of the cursor the user can
read on the dial the depth of the penetration effected.
A6 BRASS SAMPLE CUPS
They contain the material to be tested and are delivered together with the appliance.
DESCRIPTION OF PARTS- ENCLOSURE B – DETAIL OF THE APPLIANCE
B1 FIXING SCREW
B2 SET OF WEIGHTS
B3
ADJUSTMENT KNOB
B4 MACHINE BODY
B5
FIXING HANDLE
B1 FIXING SCREW
It allows to fix the needle or cone on the slider.
B2 SET OF WEIGHTS
They have to be positioned on the upper part of the slider so that the total weight of the moving component
can be reached according to the standards in force.
NB: Using the smaller plate you reach a total weight of 50 g ± 0,05; adding the bigger plate you reach a total
weight equal to 100 g ± 0,05.
B3 ADJUSTMENT KNOB
It allows to adjust with great accuracy the contact between the needle point and the specimen surface.
B4 MACHINE BODY
It supports the dial and the slider as well as their mechanisms.
B5 FIXING SCREW
It allows the displacement of the machine body along the vertical rod.
CHAPTER 6 USE
DANGER Consult the chapter “DANGEROUS PARTS AND RESIDUAL RISKS " before
proceeding.
6.1 WARNINGS