6
Instructions
Getting Started
1.
Install two AAA batteries into the battery compartment,
following the orientation icons in each battery slot.
2.
Loosen the locking collar by turning it counterclockwise.
3.
Insert the mounting foot into the camera’s hot-shoe mount.
Make sure it is completely inserted into the shoe.
4.
Tighten the locking collar by turning it clockwise until
secure.
5.
Make sure your camera has the appropriate settings.
Consult the camera’s user manual to set features for TTL and
HSS modes.
6.
Press the power button. The LED screen and the power LED
will light up.
Note:
After approximately 20 second of inactivity, the LCD
screen’s illumination will go out as a power-saving measure.
