7
ATTACH
the two foot supports to the underside
of the keyboard platform using three #10 1-1/4” flat
head Phillips screws and three spacers per foot support.
Position each set of spacers between the foot support and
the underside of the keyboard platform.
DO NOT place
washers between screw head and foot support.
Position the tube assembly by matching the square
mounting plate to the triangular pattern of recessed holes
in the center of the underside of the keyboard platform.
Attach the mounting assembly to the underside of the
keyboard platform using four #10 5/8” pan head Phillips
screws.
8
ASSEMBLE KEYBOARD PLATFORM
FOR THIS STEP
IN ORDER FROM BOTTOM:
1. KEYBOARD PLATFORM
2.
WASHER
3. FOOTREST
4.
SCREW
6x
2x
6x
4x