11
WARRANTY
THE OMEGA DENALI
warranty coverage includes 5 years on table tops, and 2 years on the base. The following limitations apply:
THIS WARRANTY
only covers defects as specified herein and does not include defects or damages attributable to improper installation,
misuse or normal surface weathering, or defects or damages caused by accidents or fire or other casualty or Acts of God, or any other causes
or occurrences beyond the manufacturer’s control. The exclusive remedial action provided for the customer hereunder shall be repair,
restoration or replacement of the components as are found to be defective.
TABLE TOP:
The replacement of new materials for those as may be defective may result in a color variance in comparison to the originally
installed laminates due to slight color or texture changes by laminate manufacturers and is not indicative of a defect. iMovR reserves the
right to substitute such laminates as are then being manufactured and is only obligated to match color and quality with such products as it is
manufacturing at the time of replacement.
THIS WARRANTY
is limited to repair, restoration and/or replacement by iMovR of any defective unit provided the manufacturer: (a) receives
a written, faxed or emailed notice of claim under this warranty, including sufficiently high resolution photographs that clearly show the
nature of the damage, and (b) within 30 days after notice of claim, is in receipt of the defective unit at its place of business, unless this
requirement is waived by iMovR. The manufacturer will arrange for retrieval of the defective product via its carrier-of-choice. In some
cases the manufacturer may elect not to retrieve the defective component, and may opt to send a replacement product based only on
photographic evidence of warrantied defects. If upon receipt and inspection of the returned component it is determined that the damage
was not due to a manufacturing flaw but rather one of the exempted reasons stated above, the costs of shipping the units to and from the
manufacturer, plus the cost of the replacement component, shall be charged back to the customer.
LIMITATION OF LIABILITY:
IT IS UNDERSTOOD AND AGREED THAT MANUFACTURER’S LIABILITY, WHETHER IN CONTRACT, IN TORT UNDER
ANY WARRANTY, IN NEGLIGENCE OR OTHERWISE, SHALL NOT EXCEED THE RETURN OF THE AMOUNT OF PURCHASE PRICE FOR THE DEFECTIVE
ITEM PAID BY PURCHASER AND UNDER NO CIRCUMSTANCES SHALL SELLER BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES.
NO ACTION, REGARDLESS OF FORM, ARISING OUT OF THE TRANSACTIONS UNDER THIS AGREEMENT MAY BE BROUGHT BY THE PURCHASER
MORE THAN ONE YEAR AFTER THE CAUSE OF ACTION HAS ACCRUED.
PREVENTATIVE MAINTENANCE & CLEANING
AFTER
first week of use: Tighten down all screws and bolts.
CLEANING THE BASE
: Clean the base frame by wiping it down with a microfiber cloth moistened with a standard household cleaning
solution. Never use solvents or abrasive or corrosive compounds on the frame. The base should be cleaned at regular intervals to remove
dust and dirt, and inspected for mechanical damage, wear and breaks - worn out parts should be replaced.
CLEANING THE TABLE TOP:
All table tops are manufactured with a “3D lamination” process that results in an extremely durable surface, similar
to what is often used in hospital environments. As such it can stand up to most cleaning solutions without risk of discoloration or degradation. Anti-
bacterial solutions may be used. Always test new cleaning solutions on a less-seen surface first before using on the entire table top.
THE OMEGA
Keyboard Platform can be set to one of two height positions. By default, the bar assembly arrives set to the lower position. You
can adjust the bar assembly higher by removing the two hex screws from both ends of the pivot bar, and reattaching the bar by inserting
those same hex screws through the upper set of holes on the bracket.
To adjust the Omega Keyboard Platform, simply loosen the central clamp by twisting the rubberized knob counterclockwise. Then push down
on the rear end of the platform for a steeper angle or push up from the bottom of the platform for a shallower angle. Once you have the
platform set to the desired position, secure it in place by tightening the rubberized knob by twisting it clockwise.
Depending on the depth and shape of your keyboard you may want to adjust the rubber bumpers forward or back. To do this, simply loosen
the rubber bumper, slide it to the desired location, and retighten.
USING THE OMEGA KEYBOARD PLATFORM