background image

 

iWaylink  Inc. 

 
 

 

iMotion MP121 / MP131 U

ser’s Manual

                                                                              3

 

 

equipment.

 

EMS and EMI Compliance Statement for 
European Users 

This equipment has been tested and passed with the requirements relating to 

electromagnetic compatibility based on the standards EN 300 328 

V2.1.1(2016-11).The equipment also tested and passed in accordance with 

the European Standard EN55022 for the both Radiated and Conducted 

emissions limits. 

 

MP121/MP131 to Which This Declaration Relates 
Is In Conformity With the Following Standards 

IEC 60950-1(ed.2), IEC 60950-1(ed.2); am1, IEC 60950-1(ed.2);am2, 

GB4943.1-2011, GB9254-2008 , GB17625.1-2012 ; EN 300 328 

V2.1.1(2016-11), UL 60950-1, 2nd Edition, 2011-12-19, CSA C22.2 No. 

60950-1-07, 2nd Edition, 2011-12, FCC part 15 subpart B, NCC LP002.z 

Warranty Limits 

Unless otherwise agreed in a contract, all the warranty period of the products 

lasts for two years since the date of purchase while that of the accessories 

(such as battery, USB cable etc.) lasts for six months since the date of 

purchase. 

For any faults happened to the products under normal use and ascribed to the 

inherent problems of the products through identification within the warranty 

period, we will provide free maintenance services. If the products within 

warranty period are judged damaged by improper artificial use by our 

maintenance representatives, we will provide maintenance quotation and 

repair the product after the customer agrees on our quotation. The damage of 

appearance, enclosure and decorative parts and components are beyond the 

scope of warranty, for which, we do not provide free maintenance services. 

Summary of Contents for MP121









































Reviews: