Bambino
4
1. Supply Power to the Camera
The Bambino can be powered either by 4 AAA batteries (alkaline battery
recommended) or by household wall outlet using the AC power adapter.
Loading the Batteries
1.
Use a screw driver and loosen
the screw on the bottom of
the camera.
2.
Open the battery
compartment cover.
3.
Insert 4 AAA batteries, then
close the battery compartment
cover and re-tighten the
screw.
4.
Slide the power switch to the
ON position. The power
indicator LED will light up in
red.
Notes:
Make sure the (+) and (-) ends of the batteries are oriented correctly as
diagrammed on the inside of the battery compartment.
Do not mix old batteries with new ones.
Remove the batteries from the camera if you do not plan to use them for
a prolonged period of time.
The power indicator LED will continuously light up in red as long as there
is sufficient battery power.
Using AC Power
1.
Plug one end of the provided AC
power adapter into a wall outlet.
2.
Plug the other end into the
power adapter socket of the
camera.
3.
Slide the power switch to the ON
position. The power indicator
LED will light up in red.
3
4
2
1
2
1
3
