background image

IMPORTANT SAFETY INSTRUCTIONS

STRANGULATION HAZARD - Keep the adapter cord out of baby’s reach.

NEVER place camera or cords within the cot/crib. 

The baby unit and cables should be at least 3 feet/1 meter away from children.

Secure the cord to the wall to keep cord away from the baby’s reach.

Never use extension cords with AC adapters. Only use the AC adapters provided.

Warning

This baby monitor is not designed to replace responsibility of human supervision on 

    children.

This baby monitor must be assembled and installed by an adult.

This product is designed for indoor use.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Clean only with dry cloth.

Do not use this baby monitor near water.

Do not install this baby monitor near a heat source.

Do not cover the baby monitor with a towel or blanket.

Unplug this apparatus during lightning storms or when unused for long periods of 

    time.

The small parts of this baby monitor can be swallowed by babies or small children. 

    Keep these parts out of reach of children.

Do not touch the plug contacts with sharp or metal objects.

Protect the power cord from being walked on or pinched, particularly at plugs, 

    convenience receptacles, and the point where they exit from the apparatus.

Only use the power adapters provided. Do not use other charges or power adapters 

    as this may damage the device and battery pack.

Caution

Risk of explosion if battery is replaced by an incorrect type. Dispose of used 

    batteries according to the instructions.

WARNING!

01

Summary of Contents for MB920
















Reviews: