ISOCON-6 USERS GUIDE
4. CONFIGURING THE ISOCON:
The ISOCON is an extremely versatile device which can support many different types of input. The unit is configured by turning the
power off, selecting the internal switch settings required and turning the power back on.
To open the Isocon, 2 catches just below the outer terminal blocks must be pushed in gently, one at a time. The front of the case
can then be pulled and the unit will come out of the box.
There are 3 switch banks, S1, S2, and S3, located inside the ISOCON as shown below:
Switch S1 and S2 configure the input type and range, and switch S3 configures the output type, range and a few additional
functions. The switch settings are explained in the next few pages. The diagrams refer to switch positions 0 and 1, with 0 being OFF
and 1 being ON. This is illustrated in the picture above.
Warning: DO NOT OPEN UNIT OR ADJUST SWITCHES WITH POWER SUPPLY, INPUT OR OUTPUT CONNECTED
ISOCON-6
24V AC or DC POWERED ISOLATING SIGNAL CONVERTER